天下网吧 >> 网吧方案 >> 网络方案 >> 正文

利用Xmodem 升级2610 IOS实例

agraph
  (c) (1) (ii) of the Rights in Technical Data and Computer
  Software clause at DFARS sec. 252.227-7013.
  
  cisco Systems, Inc.
  170 West Tasman Drive
  San Jose, California 95134-1706
  
  
  
  Cisco Internetwork Operating System Software
  IOS (tm) C2600 Software (C2600-I-M), Version 11.3(6)T, RELEASE SOFTWARE (fc1)
  Copyright (c) 1986-1998 by cisco Systems, Inc.
  Compiled Tue 06-Oct-98 18:42 by ccai
  Image text-base: 0x80008084, data-base: 0x80554578
  
  cisco 2610 (MPC860) processor (revision 0x202) with 12288K/4096K bytes of memory
  .
  Processor board ID JAB0233005Z (3677578902)
  M860 processor: part number 0, mask 32
  Bridging software.
  X.25 software, Version 3.0.0.
  1 Ethernet/IEEE 802.3 interface(s)
  1 Serial network interface(s)
  32K bytes of non-volatile configuration memory.
  4096K bytes of processor board System flash (Read/Write)
  
  
  
  Press RETURN to get started!
  
  
  00:00:06: %LINK-3-UPDOWN: Interface Ethernet0/0, changed state to up
  00:00:06: %LINK-3-UPDOWN: Interface Serial0/0, changed state to up
  00:00:06: %SYS-5-CONFIG_I: Configured from memory by console
  00:00:06: %SYS-5-RESTART: System restarted --
  Cisco Internetwork Operating System Software
  IOS (tm) C2600 Software (C2600-I-M), Version 11.3(6)T, RELEASE SOFTWARE (fc1)
  Copyright (c) 1986-1998 by cisco Systems, Inc.
  Compiled Tue 06-Oct-98 18:42 by ccai
  00:00:07: %LINEPROTO-5-UPDOWN: Line protocol on
  WL_bank_2610_2>Interface Ethernet0/0, changed state to up
  00:00:07: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed sta
  te to up
  00:00:07: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback0, changed sta
  te to up
  2610_2>
  
  
  

本文来源:天下网吧 作者:网吧方案

声明
声明:本站所发表的文章、评论及图片仅代表作者本人观点,与本站立场无关。若文章侵犯了您的相关权益,请及时与我们联系,我们会及时处理,感谢您对本站的支持!联系Email:support@txwb.com,系统开号,技术支持,服务联系QQ:1175525021本站所有有注明来源为天下网吧或天下网吧论坛的原创作品,各位转载时请注明来源链接!
天下网吧·网吧天下